Compare moats
Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.
| Amkor Technology | TSMC | Synopsys | |
|---|---|---|---|
| Moat rating | narrow The FY2025 10-K describes a real but bounded edge. On the plus side, Amkor says "Our scale and geographic diversity allow us to qualify production at multiple sites, optimize asset utilization and absorb large orders that require quick turnaround." It also says "Amkor has built long-standing relationships with most of the world's leading semiconductor companies over the last five decades." And it says that "in line with industry practice, customers usually require us to pass a lengthy and rigorous qualification process that may take several months". It falls short of wide because the same filing calls the market "highly competitive", names ASE Technology, JCET Group and Powertech Technology as rivals, and says Amkor faces Asian providers "including companies with significantly greater processing capacity, financial resources". It also says foundries "substantially larger than us" have expanded into packaging and test, and that IDMs and foundries "may decide to shift some or all of their outsourced packaging and test services to internally sourced capacity". Returns are thin: MD&A gross margin was 14.0% in 2025, 14.8% in 2024 and 14.5% in 2023, with a 7.0% operating margin in 2025. | wide TSMC's 2025 Form 20-F reports a 59.9% gross margin (up from 56.1% in 2024) and describes the company as "the technology leader among the dedicated foundries" in advanced (7-nanometer-and-below) node revenue — a durable, hard-to-replicate process-and-scale advantage that rivals with "greater financial and other resources" have not matched. | wide The FY2025 10-K positions Synopsys as 'a global leader in supplying the mission-critical EDA solutions' and, after the Ansys merger, 'the global leader in engineering S&A software' — two adjacent franchises the filing says now sit in one portfolio. |
| Moat type | cost scale Part of the 10-K's cost/scale case applies to the whole industry, not to Amkor alone. It says packaging and test service providers "can typically use their assets to support a broad range of customers and multiple end markets, potentially generating more efficient use of their production assets and a more cost-effective solution", in contrast to IDMs running their own lines. The Amkor-specific support is its footprint, which it calls "a key differentiator", and its purchasing scale: "By leveraging our purchasing power and operational expertise, we look to secure favorable pricing and supply agreements for materials and equipment, further enhancing our competitive position." It adds: "We also negotiate worldwide pricing agreements with our major suppliers to take advantage of the scale of our operations." Against other OSATs the scale edge is limited, because Item 1A concedes Asian rivals "including companies with significantly greater processing capacity, financial resources". Multi-month customer qualification and long customer relationships add a secondary switching-cost element. IP is not the source: "Although our patents are an important element of our intellectual property strategy, we are not materially dependent on any one patent or any one technology." | intangibles ip Per its 2025 Form 20-F, TSMC "compete[s] primarily on process technologies, manufacturing excellence, customer trust and service quality" and has "been issued a substantial number of patents," with 2-nanometer in volume production in 2025 and 16-angstrom risk production targeted for 2026 — proprietary process-technology know-how and IP, not merely capital (the filing explicitly notes some competitors may have greater financial resources yet still trail), are the core barrier. | switching costs The 10-K describes EDA as 'mission-critical' software licensed mostly as network licences across a customer's whole design flow, with post-contract support providing 'frequent updates to maintain the utilization of the software due to rapid changes in technology' — a dependence that renews at every process node. |
| Leadership | co leader The FY2025 10-K opens: "Amkor is the world's largest U.S. headquartered outsourced semiconductor assembly and test service provider (“OSAT”) and is a global leader in outsourced semiconductor packaging and test services." It claims to be a global leader, not the leader, and its one superlative is limited to U.S.-headquartered providers. It names ASE Technology, JCET Group and Powertech Technology as rivals. It concedes Asian competitors "including companies with significantly greater processing capacity, financial resources". About the key competitive factors it lists, it says only "We believe we are competitive in these areas." | clear leader Self-described in its 2025 20-F as "the technology leader among the dedicated foundries" in net revenue of advanced semiconductors at 7-nanometer and below; reached 2nm volume production in 2025, and Epoch AI estimates ~90% share of global advanced-node fabrication. | co leader The 10-K claims global leadership in EDA while stating 'The EDA industry is highly competitive' and that Synopsys competes against other EDA vendors and against customers' own internally developed design tools. |
| Pricing power | weak Item 1A of the FY2025 10-K says "Prices for packaging and test services have generally declined over time, and sometimes prices can change significantly in relatively short periods of time." It also says "We expect downward pressure on average selling prices for our packaging and test services to continue in the future, and this pressure may intensify during downturns in business." MD&A gross margin was 14.0% in 2025 against 14.8% in 2024 and 14.5% in 2023. The notes say the longer test-equipment depreciation life "reduced depreciation expense by approximately $59 million in 2024". Materials alone were 55.2% of 2025 net sales. The customer base is concentrated: the ten largest customers were 72% of 2025 net sales, with Apple at 29.8% and Qualcomm at 11.1%, and the filing flags "a reduction in orders or decrease in price from a significant customer" as a risk. | strong 2025 gross margin of 59.9% (up from 56.1% in 2024), attributed in the 20-F to higher capacity utilization and cost improvement, reflects strong pricing power at the leading edge despite the heavy capital intensity of new-node ramps. | moderate The 10-K lists 'license terms, price and payment terms' among the principal competitive factors and states 'No single factor drives an EDA customer's buying decision'; licence fees depend on licence type, product mix and the number of copies licensed. |
| Summary | Amkor is a back-end contractor; the 10-K says "We provide turnkey packaging and test services including wafer bump, wafer probe, wafer back-grind, package design, packaging, burn-in, system level and final test and drop shipment services." It also says "Our customers include most of the world's largest semiconductor companies." Advanced Products (flip chip, memory and wafer-level packages) were 82.8% of its $6,708M in 2025 net sales. The durable part of its position is scale and a multi-country footprint, which the filing calls "a key differentiator", backed by multi-month customer qualification and customer relationships it dates back "over the last five decades". On Arizona, the filing says: "Construction began in the second half of 2025, and we believe that this investment will strengthen our ability to serve customers seeking to regionalize their supply chains and will enhance our participation in U.S. semiconductor initiatives." Price caps the moat. The 10-K says "We expect downward pressure on average selling prices for our packaging and test services to continue in the future, and this pressure may intensify during downturns in business." It also says foundries "substantially larger than us" have expanded their operations to include packaging and test services. | TSMC is the world's largest dedicated semiconductor foundry and, per its 2025 Form 20-F, the self-described technology leader among dedicated foundries in advanced (7nm-and-below) node revenue, having reached 2-nanometer volume production in 2025 with 16-angstrom risk production on track for 2026. Independent research (Epoch AI) estimates it controls roughly 90% of global advanced-node fabrication; sustained by US$7.9 billion of 2025 R&D, a large patent portfolio and 59.9% gross margins, this process-technology and scale advantage has proven durable even against rivals with greater financial resources. | Synopsys sells the sign-off tools (PrimeTime static timing, IC Validator physical verification) and the silicon-proven IP that chip designs are built against, and the FY2025 Ansys merger added the multiphysics sign-off products (RedHawk-SC, Totem-SC) to the same portfolio, growing headcount about 40% to roughly 28,000. |
| Chain position | Back-end packaging and test step between wafer fabs and chip vendors. The 10-K says "the wafers that we receive from our customers are generally consigned to us", and Amkor serves IDMs, fabless companies, OEMs and contract foundries that outsource packaging and test. | The critical leading-edge fabrication and advanced-packaging (CoWoS) layer of the AI supply chain — high-performance computing was 58% of TSMC's 2025 revenue, and it supplies leading-edge N2/N3/N4 logic to the fabless IC-design and system companies that design AI accelerators. | Design-and-IP layer feeding both the chip designers and, post-Ansys, the systems companies that simulate the products those chips go into. |
| Products (share / barrier) |
|
|
|
| Long-horizon vote | +0.05 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.42 at weight 0.20 · swarm bullish Editorial prior, not backtested. | +0.30 at weight 0.20 · swarm neutral Editorial prior, not backtested. |