Compare moats
Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.
| Fabrinet | Cadence Design Systems | |
|---|---|---|
| Moat rating | narrow The FY2026 10-K grounds a real but bounded defence. On the defence side: Item 1 states that in the manufacturing services market "there are significant barriers to entry in our existing and target markets, including lengthy sales cycles, the need to demonstrate complex precision optical and electro-mechanical engineering and manufacturing capabilities to a prospective customer and the ability to protect a customer's intellectual property," and that qualification of a program "may take three to six months or longer to complete." On the limiting side, the same filing shows the protection does not reach price: gross profit was 12.0% of revenues in FY2026 against 12.1% in FY2025 and 12.4% in FY2024 even as revenue rose 35.7% to $4.64 billion, four customers each exceeded 10% of revenue (Cisco 19.9%, NVIDIA 16.3%, Nokia 10.7%, Amazon 10.5%), and "reliance on a small number of customers gives those customers substantial purchasing power and leverage in negotiating contracts with us." Sales are made on "individual purchase orders that have short lead times and are subject to revision or cancellation," so the qualified program is sticky while the contract is not. | wide The FY2025 10-K competition section names only a short list of full-flow rivals — Synopsys, Ansys (acquired by Synopsys) and Siemens EDA — for a toolset it describes as essential to meeting foundry manufacturing sign-off requirements. |
| Moat type | switching costs The 10-K locates the stickiness in qualification rather than in patents or scale. Customers "do not purchase our services until they qualify the services and satisfactorily complete factory audits and vendor evaluations"; qualification "may take three to six months or longer"; production is transferred "copy-exact: the setup of a production process identical to the one used by our customer"; and the filing's own experience of changing a component source is that it "resulted in our customers or their end customers requiring requalification and validation of components, a process that can often be lengthy and has negatively impacted the timing of our revenue" — the same friction a customer would face moving the program elsewhere. The filing rules out an IP-based moat itself: "Historically, patents have not played a significant role in the protection of our proprietary rights," and any process improvement developed for a customer's product is "immediately assigned to that customer." The Thailand cost base is a genuine advantage but the filing warns it is not durable on its own — "Wage increases may impact our ability to sustain our competitive advantage and may reduce our profit margin." | switching costs The 10-K states Cadence works with foundry partners to develop process design kits 'to ensure our core EDA products and solutions meet manufacturing sign-off requirements', and licenses software on two-to-three-year time-based terms — so the tools are embedded in a customer's qualified design flow, not bought per project. |
| Leadership | co leader The leadership claim in the filing is the company's own qualitative assessment: "We believe we are a leader in manufacturing products for the optical communications market," and, on breadth of process technology, "Based on our experience with customers and our qualitative assessment of our capabilities, we believe we provide a broader array of process technologies to the optics industry than any other manufacturing services provider." The same Item 1 names a crowded field against it — "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers" — and no independent share ranking is given, so the record supports front-of-field standing but not sole primacy. | co leader The 10-K calls Virtuoso 'the industry standard for custom and analog IC design' while naming Synopsys, Ansys and Siemens EDA as key competitors across the same markets. |
| Pricing power | weak Gross profit was 12.0% of revenues in FY2026, 12.1% in FY2025 and 12.4% in FY2024 — flat to down across three years in which revenue grew from $2.88 billion to $4.64 billion — and the FY2026 increase in gross profit is attributed to "sales volume and product mix," not price. Item 1 says so directly: "we expect the prices we charge for our manufactured products to decrease over time (partly as a result of competitive market forces)," with the offset coming from cycle-time, mix, yield and material-cost work rather than from rate. The risk factors add that customer consolidation gives buyers "increased leverage that may result in, among other things, decreases in our average selling prices," and that new competition "could result in price reductions for our services, reduced gross profit margins or loss of market share." | strong Product and maintenance was 91% of fiscal 2025 revenue under time-based licences 'generally two to three years', with $7.8 billion of contracted but unsatisfied performance obligations at December 31, 2025; SEC-reported operating income in the same filing was 28.2% of revenue. |
| Summary | Fabrinet is the neutral outsourced factory for complex photonics. The FY2026 10-K describes a business that wins on qualification and IP hygiene rather than on product ownership: a "factory-within-a-factory" that physically segregates each customer's engineers and floor space, copy-exact line transfers, Telcordia-grade environmental qualification, and a claim that "there is no other manufacturing services provider with a similar breadth and depth of optical and electro-mechanical engineering and process technology capabilities that does not directly compete with its customers in their end-markets." That neutrality is claimed as a belief, not demonstrated — the filing's own framing is "we believe" — and Item 1 names the field it is measured against without characterising any of them: "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers." Once a program is qualified it tends to stay, and "in many cases, we are the sole outsourced manufacturing partner used by our customers for the products that we manufacture for them." What the moat does not buy is margin. Revenue grew 35.7% in FY2026 to $4.64 billion on the AI-datacenter build-out — data center products are now 47.9% of revenue — yet gross margin slipped to 12.0%, and Item 1 concedes the company expects "the prices we charge for our manufactured products to decrease over time." The two live erosion paths are named in the risk factors: customer consolidation that "may result in, among other things, decreases in our average selling prices," and customers who "acquired the capacity to manufacture products in-house." Concentration cuts both ways this year — FY2025 had two customers above 10% of revenue, FY2026 had four, so the book broadened even as its scale grew. | Cadence sells the design and sign-off flow that chips must pass to be manufacturable: the 10-K describes foundry-co-developed PDKs, integrated DRC/LVS/STA sign-off, and multi-year time-based licences that leave $7.8 billion of contracted but unsatisfied performance obligations at December 31, 2025. |
| Chain position | A contract manufacturer sitting between optical components and the network and AI-datacenter OEMs whose brands ship the finished box. FY2026 revenue is 47.9% data center, 33.3% communications infrastructure and 18.8% automotive, industrial and other markets (FY2025: 46.2% / 30.7% / 23.1%), with Cisco, NVIDIA, Nokia and Amazon each above 10% of revenue. Fabrinet also integrates one layer down, designing and fabricating its own customized optics and glass — crystals, ferrules, precision glass tubing — at Fuzhou, China and Mountain Lakes, New Jersey, both for its own assemblies and for the merchant market, while volume manufacturing runs from the Pinehurst and Chonburi campuses in Thailand. | Upstream design layer: every chip in the graph is designed and signed off through an EDA flow before a foundry will build it. |
| Products (share / barrier) |
|
|
| Long-horizon vote | +0.05 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.35 at weight 0.20 · swarm neutral Editorial prior, not backtested. |