Skip to content

Compare moats

Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.

comparing FormFactor×Fabrinet×Dell Technologies× maximum of 3 — remove one to swap
FormFactor FORM ai moat: latest change 2026-06-26 Fabrinet FN ai moat: latest change 2026-08-18 Dell Technologies DELL ai moat: latest change 2026-03-16
Moat rating narrow

An independent tracker places FormFactor in a small group of suppliers, but the same tracker expects it to lose the top spot. TrendForce's June 2026 report on the probe card market (Part 2, 2026-06-26, https://www.trendforce.com/research/download/RP260626XO3) says 'FormFactor, Technoprobe, and MJC dominate, while Taiwan's CHPT, MPI, and WinWay gain share riding the AI wave'. It describes the economics as 'Consumable probe tips create a high-margin hardware subscription model; repair and replacement fees are key profit drivers'. Its outlook reads: 'Total revenue is forecast to surge sharply in 2026, with Technoprobe poised to overtake FormFactor as the top global supplier.' FormFactor's own margins over the last three fiscal years do not show exceptional returns. TradingPilot's fundamentals record from the FY2025 10-K (https://www.sec.gov/Archives/edgar/data/1039399/000103939926000009/0001039399-26-000009-index.htm) shows gross profit of $258.6M on $663.1M of revenue in FY2023, $307.9M on $763.6M in FY2024 and $308.9M on $785.0M in FY2025. Gross margin has since risen to 50.7% (GAAP) in Q2 2026. A defended place among three dominant suppliers, but one whose rank is slipping to a rival, is a narrow moat rather than a wide one.

source: trendforce.com

narrow

The FY2026 10-K grounds a real but bounded defence. On the defence side: Item 1 states that in the manufacturing services market "there are significant barriers to entry in our existing and target markets, including lengthy sales cycles, the need to demonstrate complex precision optical and electro-mechanical engineering and manufacturing capabilities to a prospective customer and the ability to protect a customer's intellectual property," and that qualification of a program "may take three to six months or longer to complete." On the limiting side, the same filing shows the protection does not reach price: gross profit was 12.0% of revenues in FY2026 against 12.1% in FY2025 and 12.4% in FY2024 even as revenue rose 35.7% to $4.64 billion, four customers each exceeded 10% of revenue (Cisco 19.9%, NVIDIA 16.3%, Nokia 10.7%, Amazon 10.5%), and "reliance on a small number of customers gives those customers substantial purchasing power and leverage in negotiating contracts with us." Sales are made on "individual purchase orders that have short lead times and are subject to revision or cancellation," so the qualified program is sticky while the contract is not.

source: sec.gov

narrow

The FY2026 10-K describes advantages that are real but shallow, and a revenue mix that is diluting them. It names them as 'our end-to-end solutions portfolio, go-to-market capabilities, supply chain, and global services' and calls the direct sales channel 'a significant competitive advantage', while conceding it faces 'ongoing product and price competition in all areas of our business from both branded and generic competitors' and, on components, that 'any disruption that may occur because of our dependence on single- or limited-source vendors would not disproportionately disadvantage us relative to our competitors' - i.e. no differentiated supply position. The filing's own margin table shows where the franchise actually earns: total gross margin fell from 23.8% of net revenue in Fiscal 2024 to 22.2% in Fiscal 2025 to 20.0% in Fiscal 2026, and inside that, product gross margin fell 17.5% to 15.8% to 13.7% while services gross margin rose 40.8% to 41.4% to 44.8%. Narrow rather than none, because the high-margin services and storage core is intact and its margin rate improved; narrow rather than wide, because the line that is growing carries a 13.7% product gross margin and the filing attributes the whole decline to it.

source: sec.gov

Moat type intangibles ip

The tracker locates the advantage in proprietary probe technology. TrendForce's Part 1 report (2026-06-23, https://www.trendforce.com/research/download/RP260623JC3) says 'MEMS has become the mainstream probe process; proprietary tip alloy formulas are now the key differentiator for current capacity and longevity'. FormFactor's own example is SmartMatrix, its full-wafer contactor for high-bandwidth memory (HBM). On the Q1 2026 call (https://www.fool.com/earnings/call-transcripts/2026/04/29/formfactor-form-q1-2026-earnings-transcript/), management called it 'FormFactor's differentiated Smart Matrix full wafer contactor technology'. The consumable-tip model TrendForce describes is a recurring-revenue feature of the product rather than a separate lock-in, so intangibles/IP is the better-supported moat source.

source: trendforce.com

switching costs

The 10-K locates the stickiness in qualification rather than in patents or scale. Customers "do not purchase our services until they qualify the services and satisfactorily complete factory audits and vendor evaluations"; qualification "may take three to six months or longer"; production is transferred "copy-exact: the setup of a production process identical to the one used by our customer"; and the filing's own experience of changing a component source is that it "resulted in our customers or their end customers requiring requalification and validation of components, a process that can often be lengthy and has negatively impacted the timing of our revenue" — the same friction a customer would face moving the program elsewhere. The filing rules out an IP-based moat itself: "Historically, patents have not played a significant role in the protection of our proprietary rights," and any process improvement developed for a customer's product is "immediately assigned to that customer." The Thailand cost base is a genuine advantage but the filing warns it is not durable on its own — "Wage increases may impact our ability to sustain our competitive advantage and may reduce our profit margin."

source: sec.gov

cost scale

The filing locates the advantage in scale of distribution and supply, not in proprietary rights. It states 'Our world-class supply chain operates at significant scale', describes a direct sales force plus a partner network that produced 'approximately 40% of our net revenue' in Fiscal 2026, and lists supply chain and global services among its competitive advantages. The IP alternative is ruled out in the same document: with 25,859 granted patents held at January 30, 2026, Dell still says 'we are not substantially dependent on any single patent or group of related patents.'

source: sec.gov

Leadership co leader

TrendForce's Part 2 report (2026-06-26) names 'FormFactor, Technoprobe, and MJC' as the dominant suppliers and says 'Total revenue is forecast to surge sharply in 2026, with Technoprobe poised to overtake FormFactor as the top global supplier', which implies FormFactor holds the top rank now and that TrendForce expects it to lose that rank. In logic, the rival reports a large position. Technoprobe's May 2026 company presentation (https://www.technoprobe.com/wp-content/uploads/2026/05/Technoprobe-Company-Presentation-May-2026.pdf, citing Yole's Q3 2024 test consumables monitor) gives Technoprobe 'Market Share: 34%' of the $1.6 billion 2024 logic probe card market and 60% of the $937 million MEMS logic probe card market. TrendForce gives no percentage for FormFactor. A shared front rank, with the overall lead forecast to pass to Technoprobe, is co-leadership.

source: trendforce.com

co leader

The leadership claim in the filing is the company's own qualitative assessment: "We believe we are a leader in manufacturing products for the optical communications market," and, on breadth of process technology, "Based on our experience with customers and our qualitative assessment of our capabilities, we believe we provide a broader array of process technologies to the optics industry than any other manufacturing services provider." The same Item 1 names a crowded field against it — "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers" — and no independent share ranking is given, so the record supports front-of-field standing but not sole primacy.

source: sec.gov

co leader

The 10-K's only positioning claim is the unquantified 'Dell Technologies is a leader in the global technology industry'; it names no competitor and gives no share anywhere. The band therefore rests on disclosed absolute scale - ISG net revenue of 60,826m and CSG net revenue of 50,984m in Fiscal 2026, operations in over 170 countries - set against the filing's own admission that hyperscale Infrastructure-as-a-Service buyers 'often buy their infrastructure directly from original design manufacturers', which caps how much of the market Dell can lead at all.

source: sec.gov

Pricing power moderate

Gross margin sat near 39-40% for three years, per TradingPilot's fundamentals record from the FY2025 10-K ($258.6M on $663.1M, $307.9M on $763.6M and $308.9M on $785.0M for FY2023-FY2025). It then jumped. The Q2 2026 results release (https://seekingalpha.com/pr/20600102, 2026-07-29) reports GAAP gross margin of 50.7%, against 38.4% in Q1 2026 and 37.3% in Q2 2025, and guides Q3 2026 to 52.0% plus or minus 1.5%. Management attributes the gain to cost and yield rather than price. On the Q1 2026 call it said 'pricing really is not a driver of the gross margin improvement. It's COGS reduction and our operations team continuing to improve yields and cycle times'. TrendForce describes consumable probe tips as 'a high-margin hardware subscription model'. Margins are higher now, but FormFactor itself does not credit price for the improvement.

source: trendforce.com

weak

Gross profit was 12.0% of revenues in FY2026, 12.1% in FY2025 and 12.4% in FY2024 — flat to down across three years in which revenue grew from $2.88 billion to $4.64 billion — and the FY2026 increase in gross profit is attributed to "sales volume and product mix," not price. Item 1 says so directly: "we expect the prices we charge for our manufactured products to decrease over time (partly as a result of competitive market forces)," with the offset coming from cycle-time, mix, yield and material-cost work rather than from rate. The risk factors add that customer consolidation gives buyers "increased leverage that may result in, among other things, decreases in our average selling prices," and that new competition "could result in price reductions for our services, reduced gross profit margins or loss of market share."

source: sec.gov

weak

The filing describes price-taking and its own tables confirm it. It reports 'ongoing product and price competition in all areas of our business from both branded and generic competitors' and says 'We closely monitor market pricing, including the effect of foreign exchange rate movements, in an effort to provide the best value for our customers.' Total gross margin fell from 23.8% of net revenue in Fiscal 2024 to 22.2% in Fiscal 2025 to 20.0% in Fiscal 2026, with product gross margin down to 13.7%; CSG operating margin fell three straight years (7.6%, 6.1%, 5.6% of segment revenue); and non-GAAP operating income as a percentage of net revenue 'decreased 10 basis points to 8.8%' even as revenue grew 19%. Consolidated operating margin did rise 70 basis points to 7.2%, but the filing credits a lower operating expense rate for that, not price.

source: sec.gov

Summary

FormFactor makes probe cards, the consumable interfaces used to test chips at wafer level, for foundry and logic customers and for DRAM including HBM. It also has a Systems business, whose co-packaged-optics probing products management said on the Q1 2026 call were ramping. TrendForce's June 2026 probe card reports name FormFactor, Technoprobe and MJC as the dominant suppliers. They say MEMS probes are now mainstream, with 'proprietary tip alloy formulas' the key differentiator. They describe consumable probe tips as 'a high-margin hardware subscription model', with order visibility stretching 'from one quarter to up to two years'. FormFactor is benefiting: Q2 2026 revenue was $258.2 million, up 31.9% year over year, and GAAP gross margin was 50.7% against 37.3% a year earlier. On the Q1 2026 call, management said a second HBM customer was increasing adoption of SmartMatrix, and that networking probe cards had made a leader in high-performance compute a 10% customer. The limits are competitive. TrendForce forecasts that Technoprobe will overtake FormFactor as the top global supplier in 2026, and says Taiwanese suppliers CHPT, MPI and WinWay are gaining share. Technoprobe's May 2026 presentation, citing Yole, puts its own share at 34% of the 2024 logic probe card market and 60% of MEMS logic probe cards.

Fabrinet is the neutral outsourced factory for complex photonics. The FY2026 10-K describes a business that wins on qualification and IP hygiene rather than on product ownership: a "factory-within-a-factory" that physically segregates each customer's engineers and floor space, copy-exact line transfers, Telcordia-grade environmental qualification, and a claim that "there is no other manufacturing services provider with a similar breadth and depth of optical and electro-mechanical engineering and process technology capabilities that does not directly compete with its customers in their end-markets." That neutrality is claimed as a belief, not demonstrated — the filing's own framing is "we believe" — and Item 1 names the field it is measured against without characterising any of them: "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers." Once a program is qualified it tends to stay, and "in many cases, we are the sole outsourced manufacturing partner used by our customers for the products that we manufacture for them." What the moat does not buy is margin. Revenue grew 35.7% in FY2026 to $4.64 billion on the AI-datacenter build-out — data center products are now 47.9% of revenue — yet gross margin slipped to 12.0%, and Item 1 concedes the company expects "the prices we charge for our manufactured products to decrease over time." The two live erosion paths are named in the risk factors: customer consolidation that "may result in, among other things, decreases in our average selling prices," and customers who "acquired the capacity to manufacture products in-house." Concentration cuts both ways this year — FY2025 had two customers above 10% of revenue, FY2026 had four, so the book broadened even as its scale grew.

The AI-server line is enormous and it is not a moat - the FY2026 10-K says so in its own margin bridge. AI-optimized servers net revenue went 1,873m in Fiscal 2024 to 9,286m in Fiscal 2025 to 24,683m in Fiscal 2026 (+396% then +166%), lifting total ISG revenue to 60,826m (+40%). Over the same year ISG operating income as a percentage of segment revenue fell 110 basis points to 11.7% 'due to a decline in gross margin rate that outpaced the decline in operating expense rate. Gross margin rate decreased primarily as the result of a shift in mix towards our AI-optimized servers offerings', and the Fiscal 2027 outlook repeats the expectation of 'margin rate pressure resulting from a continuing shift in mix towards our AI-optimized servers offerings'. The cleanest test of pass-through is the filing's product-versus-services split: product net revenue grew 27% to 90,405m at a 13.7% gross margin (down from 15.8% and 17.5%), while services net revenue fell 4% to 23,133m at a 44.8% gross margin. The AI boom arrived entirely as thin product revenue and did not pull the profitable services book along with it. What Dell adds is described plainly as integration: it uses contract manufacturers, buys components from suppliers and 'subsequently sell[s] those components to the manufacturer', and its own 'manufacturing process consists of assembly, software installation, functional testing, and quality control'. The bypass is named too: 'We also face competition from non-traditional IT companies, including large Infrastructure-as-a-Service providers, that often buy their infrastructure directly from original design manufacturers. Competitive pressures could increase if customers choose to move existing workloads to these providers.' What survives as a moat is the part an ODM cannot sell an enterprise: a direct sales force and account teams, a global service and support footprint whose gross margin rate is still rising, storage that held revenue within 3% of flat through the whole mix shift, and Dell Payment Solutions financing that produces multiyear recurring arrangements.

Chain position

A wafer-test consumables supplier between chipmakers and tester makers. Its customers include HBM and DRAM makers and foundry/logic chip designers. TrendForce's Part 1 report (2026-06-23) says 'Advantest and Teradyne have taken stakes in Technoprobe, FormFactor, and MJC, signaling accelerated vertical integration ahead.'

A contract manufacturer sitting between optical components and the network and AI-datacenter OEMs whose brands ship the finished box. FY2026 revenue is 47.9% data center, 33.3% communications infrastructure and 18.8% automotive, industrial and other markets (FY2025: 46.2% / 30.7% / 23.1%), with Cisco, NVIDIA, Nokia and Amazon each above 10% of revenue. Fabrinet also integrates one layer down, designing and fabricating its own customized optics and glass — crystals, ferrules, precision glass tubing — at Fuzhou, China and Mountain Lakes, New Jersey, both for its own assemblies and for the merchant market, while volume manufacturing runs from the Pinehurst and Chonburi campuses in Thailand.

Integrator between accelerator and component suppliers and enterprise or sovereign buyers: the 10-K says Dell purchases components from suppliers, sells them on to contract manufacturers, and performs 'assembly, software installation, functional testing, and quality control', then reaches customers through a direct sales force and a partner network that generated about 40% of Fiscal 2026 net revenue.

Products (share / barrier)
Long-horizon vote +0.13 at weight 0.20 · swarm neutral

Editorial prior, not backtested.

see exactly how it voted →

+0.05 at weight 0.20 · swarm neutral

Editorial prior, not backtested.

see exactly how it voted →

+0.05 at weight 0.20 · swarm neutral

Editorial prior, not backtested.

see exactly how it voted →