Compare moats
Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.
| Palantir Technologies | Trane Technologies | ASE Technology Holding | |
|---|---|---|---|
| Moat rating | narrow The FY2025 10-K competition section concedes that some competitors have 'greater name recognition, longer operating histories, and larger customer bases', 'larger and more mature intellectual property portfolios', and 'substantially greater financial, technical, and other resources' — and that Palantir is 'fundamentally competing with the internal software development efforts of our potential customers'. A real moat exists but the filing's own disclosure caps it below wide. | narrow Trane's FY2025 Form 10-K (filed 5 February 2026) makes exactly one rank claim about itself and it is hedged: 'We are one of the leading manufacturers in the world of HVAC systems and services and transport temperature control products and services'. It sits inside a Competitive Conditions section that opens 'Our products and services are sold in highly competitive markets throughout the world', describes 'a wide variety of competitors that vary by product line and services' including 'well-established regional or specialized competitors, as well as larger U.S. and non-U.S. corporations or divisions of larger companies', and names price first among 'the principal methods of competition in these markets', ahead of quality, delivery, service and support, technology and innovation. The risk factors push the same way: 'The markets that we serve are highly competitive', 'consolidation and new entrants (including non-traditional competitors) within our industries' 'could result in increased competition and pricing pressures', Trane competes 'with large companies and with smaller, local operators who may have customer, regulatory or economic advantages in the geographies in which they are located', and 'some of our competitors may employ pricing and other strategies that are not traditional'. What the filing does evidence is an advantage that gets paid for: 2025 net revenues of $21,321.9 million, up 7.5% from $19,838.2 million, of which the company's own bridge assigns 3.0 points to pricing; gross margin up 50 basis points to 36.2%; operating income of $3,967.4 million, 18.6% of revenues; and firm backlog up to $7,769.4 million from $6,747.7 million. But that advantage is not uniform in the same document: the EMEA pricing component was (0.3)% and its segment adjusted EBITDA margin fell 150 basis points to 18.3%, and Asia Pacific organic revenue fell 2.5% on 'lower volumes in China'. A position the company itself will only call 'one of the leading', defended in markets it calls highly competitive and priced unevenly across its three segments, is protection that is real but bounded. | narrow The FY2025 20-F argues ASEH out-competes IDM in-house lines because serving "a large base of customers across a wide range of products" lets it "reduce costs and shorten production cycles through high-capacity utilization and process expertise" and gives its equipment "a longer useful life" — a real but bounded edge, since the same filing calls the global packaging and testing market "highly competitive", notes "most of our customers obtain services from more than one source", flags foundry encroachment ("TSMC has offered advanced packaging technologies such as integrated fan-out"), and warns that "some of our competitors may have superior financial, marketing, manufacturing, research and development and technological resources than we do", offering P.R.C. government support of its domestic semiconductor companies as the example. |
| Moat type | switching costs The 10-K reports that 'our top three customers by revenue for the year ended December 31, 2025, have been with us for an average of ten years' and that a significant portion of revenue comes from existing customers expanding their relationships. The filing explicitly disclaims patent dependence — 'we are not dependent on any particular patent or application' — so the durable source is embedded deployment, not IP. | switching costs The filing rules out the obvious alternative in its own words. Item 1's Patents and Licenses paragraph says the Company 'does not consider any single patent, trademark, copyright, trade secret, proprietary technology, technical data, business process or any other confidential information (or any related group of any such items) to be of material importance to any segment or to the business as a whole', and the matching risk factor is blunter: 'we do not believe that our business is materially dependent on a single intellectual property right or any group of them. In our opinion, engineering, production skills and experience are more responsible for our market position than our patents and/or licenses.' That is a company disclaiming an IP moat. Where the 10-K does locate durability is the installed equipment and the channel wrapped around it. The overview frames the entire growth plan that way - 'As an industry leader with an extensive global install base, our growth strategy includes expanding recurring revenue through services and rental options' - the principal products and services table carries 'Service agreements', 'Repair and maintenance services', 'Parts and supplies (aftermarket and OEM)' and 'Rental services' alongside the equipment itself, the Distribution paragraph puts U.S. sales through Trane's own 'branch sales offices, distributors and dealers across the country' and non-U.S. sales through 'numerous subsidiary sales and service companies with a supporting chain of distributors throughout the world', and the accounting policy confirms the contracts are multi-period: 'For extended warranties and long-term service agreements, revenue for these distinct performance obligations are recognized over time on a straight-line basis over the respective contract term.' Long-lived equipment serviced under term agreements by the manufacturer's own branches is the asset this filing keeps pointing at, which is why the moat is read as an installed-base tie rather than a patent estate. | cost scale The advantage the 20-F actually claims is unit economics from volume, not lock-in: specialization and "economies of scale by providing services to a large base of customers", high capacity utilization spreading "relatively high fixed costs", and equipment that lasts longer because of the breadth of the order book. Capital intensity reinforces it — the filing says "semiconductor businesses are capital intensive and require significant investment in expensive equipment manufactured by a limited number of vendors", with the equipment market itself "characterized by intense demand, limited supply, and long delivery cycles". |
| Leadership | at parity The 10-K claims only that 'we believe we generally compete favorably with our competitors', while conceding rivals' greater scale, recognition and resources. The filing does not assert market leadership, so a leader band is not groundable from it. | co leader The company's own claim is comparative but never exclusive: 'We are one of the leading manufacturers in the world of HVAC systems and services and transport temperature control products and services' - one of, with no rank, no share figure and no competitor named anywhere in the filing. Competitive Conditions sets that against 'well-established regional or specialized competitors, as well as larger U.S. and non-U.S. corporations or divisions of larger companies', and the risk factors add that Trane competes 'with large companies and with smaller, local operators who may have customer, regulatory or economic advantages in the geographies in which they are located'. The scale behind the claim is substantial and disclosed - $21,321.9 million of 2025 net revenues, products sold in approximately 100 countries, backlog of $7,769.4 million - but the 10-K never asserts the top position in any market it serves. | co leader The 20-F calls ASEH "a leading provider of semiconductor manufacturing services in assembly and testing" and "a market leader in SiP technologies from design to assembly with high-volume manufacturing", and says it has "established ourselves as a leader through the successful introduction of leading-edge advanced packaging solutions, which have played a pivotal role in bringing advanced ASIC and HBM products to the marketplace" — but the hedged "we believe we are among the leaders in such packaging processes and technologies", alongside named consolidating rivals (Jiangsu Changjiang Electronics Technology/STATS ChipPAC, Amkor/J-Devices, Tianshui Huatian Technology/Unisem) and TSMC's InFO, describes shared rather than sole leadership. |
| Pricing power | strong FY2025 gross profit of $3.7 billion on a gross margin of 82% (84% excluding stock-based compensation), up from 80% (83% ex-SBC) in FY2024 — a sustained and rising 80%+ gross margin. | moderate Price is a separately disclosed component of growth in this filing and it is positive: of the 7.5% increase in 2025 net revenues, the company's bridge assigns 3.0% to pricing against 3.2% volume, 0.8% acquisitions and 0.5% currency, and gross margin rose 50 basis points to 36.2% 'primarily due to gross productivity and price realization, partially offset by inflation'. In the Americas the price component was 3.8% of an 8.0% revenue increase, and that segment's adjusted EBITDA margin rose 70 basis points to 21.6% 'primarily due to price realization and gross productivity, partially offset by inflation and continued business reinvestment'. What holds the band below strong is in the same bridge and the same risk factors: EMEA pricing was (0.3)% and its segment margin fell 150 basis points to 18.3%; Asia Pacific pricing was 0.4% on organic revenue down 2.5%; consolidation and new entrants 'could result in increased competition and pricing pressures'; and 'in the event there is deflation, we may experience pressure from our customers to reduce prices.' Price that sticks in the Americas, disappears in EMEA and is disclaimed as durable in the risk factors is moderate rather than strong. | weak The 20-F states the industry has "a general trend toward declining prices for products and services of a given technology over time" and that ASEH's own "average selling prices of our packaging and testing services have experienced sharp declines" under "intense price competition". FY2025 consolidated gross margin was 17.7% (up from 16.3%), and management attributes the gain to "higher packaging and testing revenue mix and higher factory utilization" rather than price; the EMS half earned a 9.2% gross margin on raw-material costs equal to 78.7% of EMS revenue, and the five largest customers supplied 46.5% of 2025 operating revenues. |
| Summary | Customers who deploy Foundry model their operations in the Ontology and build workflows on top of it, so displacement means rebuilding that layer rather than swapping a vendor — which is why the 10-K frames its main competitor as the customer's own internal build effort. Ten-year average tenure among the top three customers is the filing's own evidence that those deployments persist. | Trane Technologies is the Trane and Thermo King equipment maker - the FY2025 10-K opens by calling it 'a global climate innovator' selling HVAC, transport refrigeration and custom refrigeration through 'our strategic brands, Trane® and Thermo King®' - organised in three regional segments that produced 2025 net revenues of $17,168.8 million (Americas), $2,802.1 million (EMEA) and $1,351.0 million (Asia Pacific), with 'Approximately 25% of our net revenues in 2025 ... derived outside the U.S.' across 'approximately 100 countries' and 'no single external customer that accounted for more than 10% of our consolidated net revenues in 2025, 2024 or 2023'. The filing is candid that the markets are contested and equally candid that its position does not rest on intellectual property: 'engineering, production skills and experience are more responsible for our market position than our patents and/or licenses.' The durable asset it does describe is the installed base and the aftermarket attached to it - an 'extensive global install base' whose monetisation through 'services and rental options' is the stated growth strategy, reached through branch sales offices, dealers and distributors, with service agreements, repair and maintenance, aftermarket and OEM parts and rental all listed among the principal products. The 2025 financials carry that signature: revenues up 7.5% to $21,321.9 million split 3.2 points volume, 3.0 points price, 0.8 points acquisitions and 0.5 points currency; gross margin up 50 basis points to 36.2% 'primarily due to gross productivity and price realization, partially offset by inflation'; and backlog of $7,769.4 million on equipment where 'orders for specialized equipment or specific customer applications are submitted with extended lead times'. The limits are in the same filing. Price contributed 3.8% in the Americas but (0.3)% in EMEA and 0.4% in Asia Pacific; EMEA's segment adjusted EBITDA margin fell 150 basis points to 18.3%; Asia Pacific organic revenue fell 2.5% on 'lower volumes in China'; the Americas' otherwise strong year was 'partially offset by weaker volume in our Residential business'; and the risk factors warn that refrigerant regulation 'could make some of our existing HVAC and refrigeration products non-compliant or obsolete', with the company 'developing and selling our next generation products that utilize lower global warming potential solutions' against $347.6 million of 2025 research and development spending. For the AI build-out specifically, the link exists in the filing but is unsized: 'Data center HVAC systems', 'Data center liquid cooling solutions', 'Data center facility controls' and 'Data center services' appear in the principal products and services table, and those four entries are the only places the phrase occurs anywhere in the 10-K - no revenue, no ranking, no share, and no mention at all in the MD&A discussion of 2025 growth. | ASEH sells turnkey assembly and test at a scale most captive IDM lines cannot match: the 20-F says it is "involved in all stages of the semiconductor manufacturing process except circuit design and wafer fabrication", and leans on Taiwan, "currently the largest center for outsourced semiconductor manufacturing in the world", plus a "strategic alliance with TSMC", to sit next to the foundries its customers already use. The durable part is cost position from utilization, not customer capture — the filing concedes customers multi-source and that foundries are moving into advanced packaging from above. |
| Chain position | Application-layer software sitting above the cloud and model providers; AIP connects to third-party LLMs rather than supplying them. | Trane sits on the facility side of the AI build-out rather than in the compute stack. Its FY2025 10-K lists 'Data center HVAC systems', 'Data center liquid cooling solutions', 'Data center facility controls' and 'Data center services' among its principal products and services, alongside 'Thermal energy storage' and 'Smart and AI-enabled services'. Those four entries are the only occurrences of the phrase in the entire filing: there is no data center revenue figure, no ranking, no named competitor and no separate reporting - segment disclosure stops at Americas, EMEA and Asia Pacific, and the MD&A attributes the Americas' 7.4% organic growth to 'realization of price increases and higher volumes led by strong demand within our Commercial HVAC business' without naming an end market. | Back-end contractor to the AI silicon chain: the 20-F ties its FOCoS, FOCoS-Bridge and 2.5D/3D lines to "ASICs and HBM for HPC, networking, server and AI/ML applications" and "AI accelerators for AI training", and warns that a slowdown in AI demand would leave "lower utilization rates for our specialized equipment". |
| Products (share / barrier) |
|
|
|
| Long-horizon vote | +0.11 at weight 0.20 · swarm bullish Editorial prior, not backtested. | +0.13 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.05 at weight 0.20 · swarm neutral Editorial prior, not backtested. |