Compare moats
Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.
| Fabrinet | ServiceNow | Amkor Technology | |
|---|---|---|---|
| Moat rating | narrow The FY2026 10-K grounds a real but bounded defence. On the defence side: Item 1 states that in the manufacturing services market "there are significant barriers to entry in our existing and target markets, including lengthy sales cycles, the need to demonstrate complex precision optical and electro-mechanical engineering and manufacturing capabilities to a prospective customer and the ability to protect a customer's intellectual property," and that qualification of a program "may take three to six months or longer to complete." On the limiting side, the same filing shows the protection does not reach price: gross profit was 12.0% of revenues in FY2026 against 12.1% in FY2025 and 12.4% in FY2024 even as revenue rose 35.7% to $4.64 billion, four customers each exceeded 10% of revenue (Cisco 19.9%, NVIDIA 16.3%, Nokia 10.7%, Amazon 10.5%), and "reliance on a small number of customers gives those customers substantial purchasing power and leverage in negotiating contracts with us." Sales are made on "individual purchase orders that have short lead times and are subject to revision or cancellation," so the qualified program is sticky while the contract is not. | narrow The FY2025 10-K shows RPO of $28.2 billion, up 27%; customers above $5 million of ACV at 603, 502 and 420 as of December 31 2025, 2024 and 2023; revenue of $13,278 million, up 21%; and a 98% renewal rate for three years. That rate cannot prove durability: the filing computes it excluding "changes in price or users," says it "does not reflect increased or decreased purchases," and warns "period-to-period comparison of renewal rates may not be meaningful." The company also calls its market "characterized by fragmentation, low barriers to entry." Real switching costs plus compounding large accounts support narrow; wide would need durability proof this filing lacks. | narrow The FY2025 10-K describes a real but bounded edge. On the plus side, Amkor says "Our scale and geographic diversity allow us to qualify production at multiple sites, optimize asset utilization and absorb large orders that require quick turnaround." It also says "Amkor has built long-standing relationships with most of the world's leading semiconductor companies over the last five decades." And it says that "in line with industry practice, customers usually require us to pass a lengthy and rigorous qualification process that may take several months". It falls short of wide because the same filing calls the market "highly competitive", names ASE Technology, JCET Group and Powertech Technology as rivals, and says Amkor faces Asian providers "including companies with significantly greater processing capacity, financial resources". It also says foundries "substantially larger than us" have expanded into packaging and test, and that IDMs and foundries "may decide to shift some or all of their outsourced packaging and test services to internally sourced capacity". Returns are thin: MD&A gross margin was 14.0% in 2025, 14.8% in 2024 and 14.5% in 2023, with a 7.0% operating margin in 2025. |
| Moat type | switching costs The 10-K locates the stickiness in qualification rather than in patents or scale. Customers "do not purchase our services until they qualify the services and satisfactorily complete factory audits and vendor evaluations"; qualification "may take three to six months or longer"; production is transferred "copy-exact: the setup of a production process identical to the one used by our customer"; and the filing's own experience of changing a component source is that it "resulted in our customers or their end customers requiring requalification and validation of components, a process that can often be lengthy and has negatively impacted the timing of our revenue" — the same friction a customer would face moving the program elsewhere. The filing rules out an IP-based moat itself: "Historically, patents have not played a significant role in the protection of our proprietary rights," and any process improvement developed for a customer's product is "immediately assigned to that customer." The Thailand cost base is a genuine advantage but the filing warns it is not durable on its own — "Wage increases may impact our ability to sustain our competitive advantage and may reduce our profit margin." | switching costs The binding force is architecture and configuration. The filing describes "a multi-instance architecture that provides each customer with a dedicated application layer and database," an ITOM product that "maintains a single record of all IT configurable items," and products built to "integrate with existing workflows rather than replace them." Once that record and its integrations are configured, replacement becomes a re-platforming program — our inference, as the filing quantifies no switching cost. Not IP: it holds "over 2,000 issued U.S. and foreign patents" but is not "materially dependent on any single patent." Not network effects. | cost scale Part of the 10-K's cost/scale case applies to the whole industry, not to Amkor alone. It says packaging and test service providers "can typically use their assets to support a broad range of customers and multiple end markets, potentially generating more efficient use of their production assets and a more cost-effective solution", in contrast to IDMs running their own lines. The Amkor-specific support is its footprint, which it calls "a key differentiator", and its purchasing scale: "By leveraging our purchasing power and operational expertise, we look to secure favorable pricing and supply agreements for materials and equipment, further enhancing our competitive position." It adds: "We also negotiate worldwide pricing agreements with our major suppliers to take advantage of the scale of our operations." Against other OSATs the scale edge is limited, because Item 1A concedes Asian rivals "including companies with significantly greater processing capacity, financial resources". Multi-month customer qualification and long customer relationships add a secondary switching-cost element. IP is not the source: "Although our patents are an important element of our intellectual property strategy, we are not materially dependent on any one patent or any one technology." |
| Leadership | co leader The leadership claim in the filing is the company's own qualitative assessment: "We believe we are a leader in manufacturing products for the optical communications market," and, on breadth of process technology, "Based on our experience with customers and our qualitative assessment of our capabilities, we believe we provide a broader array of process technologies to the optics industry than any other manufacturing services provider." The same Item 1 names a crowded field against it — "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers" — and no independent share ranking is given, so the record supports front-of-field standing but not sole primacy. | clear leader The call is scoped to IT service management. Apps Run The World's 2024 ITSM ranking (page dated 23 July 2025) places ServiceNow first at 44.4% share, ahead of Atlassian, BMC, GoTo and Ivanti, in an $11.4 billion market where the top ten hold 83.3%. Scale corroborates: about 8,700 customers, 29,187 employees, $13,278 million of revenue, $28.2 billion of RPO. References to "two decades partnering with enterprise customers" and process knowledge "that cannot be readily replicated" are the filing's own characterisation. Outside ITSM it is weaker: one of six Leaders in the 2025 Gartner LCAP quadrant, and tenth of ten in CRM behind Salesforce at 26.1%. | co leader The FY2025 10-K opens: "Amkor is the world's largest U.S. headquartered outsourced semiconductor assembly and test service provider (“OSAT”) and is a global leader in outsourced semiconductor packaging and test services." It claims to be a global leader, not the leader, and its one superlative is limited to U.S.-headquartered providers. It names ASE Technology, JCET Group and Powertech Technology as rivals. It concedes Asian competitors "including companies with significantly greater processing capacity, financial resources". About the key competitive factors it lists, it says only "We believe we are competitive in these areas." |
| Pricing power | weak Gross profit was 12.0% of revenues in FY2026, 12.1% in FY2025 and 12.4% in FY2024 — flat to down across three years in which revenue grew from $2.88 billion to $4.64 billion — and the FY2026 increase in gross profit is attributed to "sales volume and product mix," not price. Item 1 says so directly: "we expect the prices we charge for our manufactured products to decrease over time (partly as a result of competitive market forces)," with the offset coming from cycle-time, mix, yield and material-cost work rather than from rate. The risk factors add that customer consolidation gives buyers "increased leverage that may result in, among other things, decreases in our average selling prices," and that new competition "could result in price reductions for our services, reduced gross profit margins or loss of market share." | moderate The filing discloses no average selling price, no net revenue retention and no pricing data, and the renewal rate is no proxy — it "does not reflect increased or decreased purchases" and excludes "changes in price or users." Revenue up 21%, the $5 million-plus cohort up about 20% annually and RPO up 27% are all consistent with expansion at flat pricing. Margins cut the other way: subscription gross profit fell to 80% from 82% with no stated cause, and professional services gross loss widened to 5% from 2%. One real lever is that "certain AI and data solutions include a consumption-based pricing component." | weak Item 1A of the FY2025 10-K says "Prices for packaging and test services have generally declined over time, and sometimes prices can change significantly in relatively short periods of time." It also says "We expect downward pressure on average selling prices for our packaging and test services to continue in the future, and this pressure may intensify during downturns in business." MD&A gross margin was 14.0% in 2025 against 14.8% in 2024 and 14.5% in 2023. The notes say the longer test-equipment depreciation life "reduced depreciation expense by approximately $59 million in 2024". Materials alone were 55.2% of 2025 net sales. The customer base is concentrated: the ten largest customers were 72% of 2025 net sales, with Apple at 29.8% and Qualcomm at 11.1%, and the filing flags "a reduction in orders or decrease in price from a significant customer" as a risk. |
| Summary | Fabrinet is the neutral outsourced factory for complex photonics. The FY2026 10-K describes a business that wins on qualification and IP hygiene rather than on product ownership: a "factory-within-a-factory" that physically segregates each customer's engineers and floor space, copy-exact line transfers, Telcordia-grade environmental qualification, and a claim that "there is no other manufacturing services provider with a similar breadth and depth of optical and electro-mechanical engineering and process technology capabilities that does not directly compete with its customers in their end-markets." That neutrality is claimed as a belief, not demonstrated — the filing's own framing is "we believe" — and Item 1 names the field it is measured against without characterising any of them: "Benchmark Electronics, Inc., Celestica Inc., InnoLight Technology (Suzhou) Ltd., Jabil Inc., Sanmina Corporation, Venture Corporation Limited and Eoptolink Technology Inc., Ltd., as well as the internal manufacturing capabilities of our customers." Once a program is qualified it tends to stay, and "in many cases, we are the sole outsourced manufacturing partner used by our customers for the products that we manufacture for them." What the moat does not buy is margin. Revenue grew 35.7% in FY2026 to $4.64 billion on the AI-datacenter build-out — data center products are now 47.9% of revenue — yet gross margin slipped to 12.0%, and Item 1 concedes the company expects "the prices we charge for our manufactured products to decrease over time." The two live erosion paths are named in the risk factors: customer consolidation that "may result in, among other things, decreases in our average selling prices," and customers who "acquired the capacity to manufacture products in-house." Concentration cuts both ways this year — FY2025 had two customers above 10% of revenue, FY2026 had four, so the book broadened even as its scale grew. | ServiceNow sells a workflow platform that sits on top of, rather than replaces, an enterprise's existing systems. Each customer gets a dedicated application layer and database, ITOM maintains a single record of all IT configurable items, and products integrate with existing workflows rather than replace them; once that record and its integrations span IT, HR and customer service, displacement becomes a re-platforming exercise. The evidence is in large commitments: $5 million-plus ACV customers rose from 420 to 502 to 603, and RPO reached $28.2 billion, up 27%, against $13,278 million of FY2025 revenue. The moat is bounded by a market the company itself calls fragmented with low barriers to entry, by larger rivals that can bundle or cut price, and by falling subscription gross margin, 82% to 80%. | Amkor is a back-end contractor; the 10-K says "We provide turnkey packaging and test services including wafer bump, wafer probe, wafer back-grind, package design, packaging, burn-in, system level and final test and drop shipment services." It also says "Our customers include most of the world's largest semiconductor companies." Advanced Products (flip chip, memory and wafer-level packages) were 82.8% of its $6,708M in 2025 net sales. The durable part of its position is scale and a multi-country footprint, which the filing calls "a key differentiator", backed by multi-month customer qualification and customer relationships it dates back "over the last five decades". On Arizona, the filing says: "Construction began in the second half of 2025, and we believe that this investment will strengthen our ability to serve customers seeking to regionalize their supply chains and will enhance our participation in U.S. semiconductor initiatives." Price caps the moat. The 10-K says "We expect downward pressure on average selling prices for our packaging and test services to continue in the future, and this pressure may intensify during downturns in business." It also says foundries "substantially larger than us" have expanded their operations to include packaging and test services. |
| Chain position | A contract manufacturer sitting between optical components and the network and AI-datacenter OEMs whose brands ship the finished box. FY2026 revenue is 47.9% data center, 33.3% communications infrastructure and 18.8% automotive, industrial and other markets (FY2025: 46.2% / 30.7% / 23.1%), with Cisco, NVIDIA, Nokia and Amazon each above 10% of revenue. Fabrinet also integrates one layer down, designing and fabricating its own customized optics and glass — crystals, ferrules, precision glass tubing — at Fuzhou, China and Mountain Lakes, New Jersey, both for its own assemblies and for the merchant market, while volume manufacturing runs from the Pinehurst and Chonburi campuses in Thailand. | Enterprise workflow platform layered on top of customers' existing systems of record. It consumes public cloud capacity (named relationships with AWS, Google, Microsoft and NVIDIA) plus its own data centers, and reaches customers through a direct sales force, global system integrators (Accenture, Deloitte, EY, Infosys, KPMG) and resale partners. Microsoft is named as both partner and competitor. | Back-end packaging and test step between wafer fabs and chip vendors. The 10-K says "the wafers that we receive from our customers are generally consigned to us", and Amkor serves IDMs, fabless companies, OEMs and contract foundries that outsource packaging and test. |
| Products (share / barrier) |
|
|
|
| Long-horizon vote | +0.05 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.20 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.05 at weight 0.20 · swarm neutral Editorial prior, not backtested. |