Compare moats
Up to three covered companies, band by band. Every call is a curated editorial judgment, never a disclosed figure — and every band carries its cited basis.
| FormFactor | Nova Ltd | ASM International | |
|---|---|---|---|
| Moat rating | narrow An independent tracker places FormFactor in a small group of suppliers, but the same tracker expects it to lose the top spot. TrendForce's June 2026 report on the probe card market (Part 2, 2026-06-26, https://www.trendforce.com/research/download/RP260626XO3) says 'FormFactor, Technoprobe, and MJC dominate, while Taiwan's CHPT, MPI, and WinWay gain share riding the AI wave'. It describes the economics as 'Consumable probe tips create a high-margin hardware subscription model; repair and replacement fees are key profit drivers'. Its outlook reads: 'Total revenue is forecast to surge sharply in 2026, with Technoprobe poised to overtake FormFactor as the top global supplier.' FormFactor's own margins over the last three fiscal years do not show exceptional returns. TradingPilot's fundamentals record from the FY2025 10-K (https://www.sec.gov/Archives/edgar/data/1039399/000103939926000009/0001039399-26-000009-index.htm) shows gross profit of $258.6M on $663.1M of revenue in FY2023, $307.9M on $763.6M in FY2024 and $308.9M on $785.0M in FY2025. Gross margin has since risen to 50.7% (GAAP) in Q2 2026. A defended place among three dominant suppliers, but one whose rank is slipping to a rival, is a narrow moat rather than a wide one. | narrow Nova is gaining share and earning steady margins, but in a market another vendor dominates. On the Q1 2026 call (2026-05-14, https://www.investing.com/news/transcripts/earnings-call-transcript-nova-semiconductors-beats-q1-2026-forecasts-stock-rises-93CH-4688858), the CEO said 'The latest Gartner market share report' shows 'an additional 400 basis points share gain in Film SIMS and critical dimension metrology', the 'second consecutive year of significant share growth, cementing Nova's position as this market's second-largest vendor'. The 2025 20-F (filed 2026-02-17) says Nova's product revenues grew at a CAGR of approximately 27.5% over 2020-2025, while Gartner estimates the process-control sector's CAGR at approximately 16.0%. Gross margin was 57.4% in 2025 and 57.6% in 2024. But the leader is KLA: Castellano of The Information Network (2025-09-10) writes that his non-metal thin film share table shows how KLA 'has entrenched its dominance' and how Nova 'has built a steady secondary position'. The 20-F also warns that 'a number of patents which relate to our main-stream products have already expired or are expected to expire in the coming years', which 'may add significant competition'. One customer took 23% of 2025 revenue and China 33%. Durable but second-place, so narrow. | narrow The 2025 annual report (published 2026-03-12) says 'ASM is the leader in the fast-growing single-wafer ALD market – with a market share of 55%+ (ASM estimate, Investor Day 2025)'. It says ASM 'maintained leadership with our market share surpassing 55%' as the industry moved from FinFET to GAA. And it says that 'Based on the breadth of our R&D engagements and critical production-tool-of-record (PTOR) selections already secured in 2025, we expect to at least maintain our market share' into the 1.4nm node. The Q2 2026 results (https://www.asm.com/media/y0mkxj21/20260728-asm-reports-second-quarter-2026-results.pdf) say the 1.4nm node is on track for its first meaningful contribution in the second half of 2026, 'reflecting increased market share gains in both ALD and Epi'. 2025 gross margin was 51.8%. That is a strong, profitable position, but every share figure behind it is ASM's own estimate or expectation, and no independent share source supports it, so the rating is narrow rather than wide. The exposures also weigh: the five largest customers took about 53.6% of 2025 revenue and China more than 30%, and the report describes the main competitors as 'much larger companies from the United States and Asia'. |
| Moat type | intangibles ip The tracker locates the advantage in proprietary probe technology. TrendForce's Part 1 report (2026-06-23, https://www.trendforce.com/research/download/RP260623JC3) says 'MEMS has become the mainstream probe process; proprietary tip alloy formulas are now the key differentiator for current capacity and longevity'. FormFactor's own example is SmartMatrix, its full-wafer contactor for high-bandwidth memory (HBM). On the Q1 2026 call (https://www.fool.com/earnings/call-transcripts/2026/04/29/formfactor-form-q1-2026-earnings-transcript/), management called it 'FormFactor's differentiated Smart Matrix full wafer contactor technology'. The consumable-tip model TrendForce describes is a recurring-revenue feature of the product rather than a separate lock-in, so intangibles/IP is the better-supported moat source. | intangibles ip The 20-F grounds Nova's position in measurement technology and know-how. Its patents cover optical measurement, integrated process-control concepts, X-ray measurement systems and chemical metrology, and it says 'Our in-house know-how is an important element of our intellectual property', adding that 'duplication of this coordination by competitors or individuals seeking to copy our products would be difficult' and that 'most of the core technology operating on our systems is not exposed to a user or to our competitors'. R&D staff numbered about 682, approximately 163 with Ph.D.s. Switching friction is real too: the 20-F says that once a manufacturer selects a vendor's equipment it 'generally relies upon that equipment for the specific production line application and frequently will attempt to consolidate its other capital equipment requirements with the same vendor'. But Nova is the share gainer against an incumbent, which points to technology rather than lock-in as the primary source. Patent expiries on main-stream products are a stated weakness. | intangibles ip The report grounds the ALD lead in accumulated process know-how and patents rather than unit cost: 'ASM has the broadest portfolio of ALD products with innovative ALD reactor designs. Our strength in chemistries and applications using new materials means our customers can meet advanced node technology challenges.' It also cites a LexisNexis PatentSight study finding that 'ASM holds a strong and impactful patent portfolio on its core strength of ALD as measured by both Competitive Impact and Patent Asset Index'. Switching friction reinforces this. Tools enter fabs through PTOR selection, the report notes that 'Failing a customer during a production ramp could create significant problems for them', and installed systems are supported 'with a view to having them in production 24/7 for 20+ years'. But ASM wins those PTOR slots node by node on process capability, which makes IP the primary source. |
| Leadership | co leader TrendForce's Part 2 report (2026-06-26) names 'FormFactor, Technoprobe, and MJC' as the dominant suppliers and says 'Total revenue is forecast to surge sharply in 2026, with Technoprobe poised to overtake FormFactor as the top global supplier', which implies FormFactor holds the top rank now and that TrendForce expects it to lose that rank. In logic, the rival reports a large position. Technoprobe's May 2026 company presentation (https://www.technoprobe.com/wp-content/uploads/2026/05/Technoprobe-Company-Presentation-May-2026.pdf, citing Yole's Q3 2024 test consumables monitor) gives Technoprobe 'Market Share: 34%' of the $1.6 billion 2024 logic probe card market and 60% of the $937 million MEMS logic probe card market. TrendForce gives no percentage for FormFactor. A shared front rank, with the overall lead forecast to pass to Technoprobe, is co-leadership. | fast follower The share evidence puts Nova second. On the Q1 2026 call the CEO said the latest Gartner market share report cements Nova's 'position as this market's second-largest vendor' in film and critical dimension metrology. That ranking comes from Gartner but reaches us through Nova's own call. Castellano (The Information Network, 2025-09-10, https://drrobertcastellano.substack.com/p/onto-innovations-strategic-drift) independently writes that his non-metal thin film share table shows how KLA 'has entrenched its dominance' and how Nova 'has built a steady secondary position'. Nova is stronger in sub-segments: SemiAnalysis (2022-09-06) writes that Nova has 'a high share in integrated optical critical dimension (OCD) inspection tools and materials metrology tools', though 'little success outside these sub-segments'. | co leader In single-wafer ALD, which is more than half of equipment sales, the report calls ASM 'the leader' with a 55%+ share. That share is ASM's own estimate; the Investor Day 2025 deck (https://www.asm.com/media/m3jhkm12/asm_investor_day_2025.pdf) sources it to 'ASM internal analysis and TechInsights'. With no independent share source, the band is held at co_leader rather than clear_leader. ASM does not lead every line: 'ASM has the number two share in the Epi equipment market', and in PECVD and vertical furnaces it is 'focused on niche portions of the market'. |
| Pricing power | moderate Gross margin sat near 39-40% for three years, per TradingPilot's fundamentals record from the FY2025 10-K ($258.6M on $663.1M, $307.9M on $763.6M and $308.9M on $785.0M for FY2023-FY2025). It then jumped. The Q2 2026 results release (https://seekingalpha.com/pr/20600102, 2026-07-29) reports GAAP gross margin of 50.7%, against 38.4% in Q1 2026 and 37.3% in Q2 2025, and guides Q3 2026 to 52.0% plus or minus 1.5%. Management attributes the gain to cost and yield rather than price. On the Q1 2026 call it said 'pricing really is not a driver of the gross margin improvement. It's COGS reduction and our operations team continuing to improve yields and cycle times'. TrendForce describes consumable probe tips as 'a high-margin hardware subscription model'. Margins are higher now, but FormFactor itself does not credit price for the improvement. | moderate Gross margin was 57.4% in 2025 and 57.6% in 2024 (Q4 2025 release), 57.7% in Q1 2026 and 56.5% in Q2 2026 (Q2 2026 release, https://www.novami.com/investors/press-releases/nova-reports-record-second-quarter-2026-financial-results/). The 20-F credits the shift to selling directly to chipmakers with improving 'our products gross margins and net profitability'. Buyers are concentrated: the five largest customers took 51% of 2025 revenue, with Customer A at 23%, and the 20-F warns that dependence on 'few process control product lines' exposes Nova to anything 'adversely affecting the pricing' of those lines. | moderate Gross margin rose from 50.5% to 51.8% in 2025 and was 51.9% in Q2 2026. But the report attributes the 2025 gain to 'a very strong mix, including a continued solid contribution from the Chinese market' and to efficiency programs, not to price. It targets a range of 47% to 51% for 2026-2030, and the Q2 2026 release expects full-year 2026 gross margin 'to be around 51%'. Buyers are concentrated: the 10 largest customers were about 72.3% of 2025 revenue, the five largest about 53.6%, and two customers each contributed more than 10% of total revenue. |
| Summary | FormFactor makes probe cards, the consumable interfaces used to test chips at wafer level, for foundry and logic customers and for DRAM including HBM. It also has a Systems business, whose co-packaged-optics probing products management said on the Q1 2026 call were ramping. TrendForce's June 2026 probe card reports name FormFactor, Technoprobe and MJC as the dominant suppliers. They say MEMS probes are now mainstream, with 'proprietary tip alloy formulas' the key differentiator. They describe consumable probe tips as 'a high-margin hardware subscription model', with order visibility stretching 'from one quarter to up to two years'. FormFactor is benefiting: Q2 2026 revenue was $258.2 million, up 31.9% year over year, and GAAP gross margin was 50.7% against 37.3% a year earlier. On the Q1 2026 call, management said a second HBM customer was increasing adoption of SmartMatrix, and that networking probe cards had made a leader in high-performance compute a 10% customer. The limits are competitive. TrendForce forecasts that Technoprobe will overtake FormFactor as the top global supplier in 2026, and says Taiwanese suppliers CHPT, MPI and WinWay are gaining share. Technoprobe's May 2026 presentation, citing Yole, puts its own share at 34% of the 2024 logic probe card market and 60% of MEMS logic probe cards. | Nova makes metrology systems that measure dimensions, films, materials and chemistry during chip manufacturing. Its 20-F groups the portfolio as integrated and standalone dimensional (optical CD) metrology, materials metrology (VeraFlex XPS/XRF, Metrion in-line SIMS, Elipson Raman), chemical metrology for plating baths (Ancolyzer, AncoScene, DMR, from the 2022 ancosys acquisition), and modeling software. The January 2025 Sentronics acquisition added modular dimensional metrology for wafer-level packaging. Nova sells 'substantially all' its products directly to chipmakers and serves 'all leading manufacturers in the logic, foundry, memory and packaging sectors'. 2025 revenue was a record $880.6 million, up 31%, and Q2 2026 revenue a record $255.0 million. The Q2 2026 release credits 'continued market share gains' and record revenue from advanced logic and advanced packaging. The 20-F names Onto Innovation and KLA as its main competitors, with process-equipment makers developing in-situ sensors and 'the recent emergence of local competitors in China'. On the Q1 2026 call (https://www.marketbeat.com/earnings/reports/2026-5-14-nova-measuring-instruments-ltd-stock/), the CEO said Nova is 'seeing emerging XPS and material metrology competition', including from 'a local vendor in China'. The exposures are concentration (the five largest customers were 51% of 2025 revenue, one of them 23%), China (33% of 2025 revenue) and patent expiries on main-stream products. | ASM International, headquartered in the Netherlands, makes wafer-processing equipment with a focus on deposition: single-wafer ALD, silicon epitaxy, PECVD, vertical furnaces, silicon-carbide epitaxy and, since its acquisition of Axus in December 2025, CMP. Spares & Services made up 23% of 2025 revenue. ALD is the core. It was the largest product line, 'clearly accounting for more than half of our equipment sales', and ASM estimates its single-wafer ALD share at 55%+. The report frames ALD as increasingly necessary, saying 'ALD is the only deposition technology capable of meeting the coverage and film-property requirements for complex 3D structures', and expects ALD layers to grow in GAA transistor stacks, backside-power architectures and future 4F² DRAM. Epitaxy is the second-largest line: the report says ASM holds the number two share there and lifted its leading-edge share from 12% in 2020 to 25% in 2024, both by ASM's own figures. 2025 revenue reached a record €3.2 billion at a gross margin of 51.8%; per the Q2 2026 results, Q2 2026 revenue was €1,003 million at 51.9%. The exposures are customer concentration (the five largest customers were about 53.6% of 2025 revenue), geography (Asia was 80% of revenue and China more than 30%), and export restrictions that the report says are 'impacting our ability to sell and service systems in certain jurisdictions and for certain customers'. |
| Chain position | A wafer-test consumables supplier between chipmakers and tester makers. Its customers include HBM and DRAM makers and foundry/logic chip designers. TrendForce's Part 1 report (2026-06-23) says 'Advantest and Teradyne have taken stakes in Technoprobe, FormFactor, and MJC, signaling accelerated vertical integration ahead.' | Upstream metrology supplier to logic, foundry, memory and packaging chipmakers, selling directly to manufacturers. Its integrated systems are built into process tools. China was 33%, Taiwan 29% and Korea 16% of 2025 revenue. | Upstream wafer-fab-equipment supplier to logic/foundry and memory chipmakers. 'The leading-edge logic/foundry market was the main growth driver for ASM, on the back of 2nm investments' in 2025, advanced-node DRAM was the largest part of memory sales, and Asia was 80% of revenue. |
| Products (share / barrier) |
|
|
|
| Long-horizon vote | +0.13 at weight 0.20 · swarm neutral Editorial prior, not backtested. | +0.06 at weight 0.20 · swarm bearish Editorial prior, not backtested. | +0.13 at weight 0.20 · swarm neutral Editorial prior, not backtested. |